Thermodinamics and Mutual Distribution of Macromolecules in the Systems: Chlorine Chlorocontaining Polymers
Article Sidebar
Main Article Content
Abstract
In given work a scientific base compatibility of polymers, produced by industry have been studied by revealing of thermodynamically regularities of polymer mixtures. The most significant thermodynamic regularities of the mixtures of polyolefin , produced by industry and heterochained polymers have been revealed and on this base the scientific bases of their compatibility have been developed for creation of multicomponent compositional materials with given complex of operating properties. Key words: polymer-polymer mixtures, chlorinated polyethylene (CPE), polymethylmetaacrylate (PMMA), polyethylene of low density (PELD), chlorcarboxylated polyethylene of low density (CCPE) chlorinated PELD (CPE), polyvinyl chloride (PVC), criteria of compatibility, chlorination, upper and lower critical temperature, specific holding of volume, Qibbs mixing energy, parameter of solubility, distribution of macromolecules, chlorine-chlorocontaining polymers, polar groups, thermodynamically compatibility, sorbate, gas-carrier.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
How to Cite
References
D.Simonov – Yemelyanov, V.W.Kuznetsov. Principles of compositional materials creation. Text-book. M. MICT, 1987, 85p.
Base of technology processing of plastic mass. Text-book for high schools/S.V.Vlasov, M. “Chemistry”, 2004, 600p.
V.F.Vakhidov, O.M.KArimov, Z.E.Eyvazova. Technics of oil-gas production, Baku, Azerneshr, 2008, 440p.
V.K.Krijanovsky, M.A.Kerber, V.V.Burlov. Production of products from polymer materials. Sankt-Petersburg, 2008, 450p.
KeremShixaliyev. Propeties of the Composition Based on modified Polyethylenes. International journal of Innovative Technology and Exploring Engineering. Volume-9 issue- / Januaru 2020.рр2484-2493
Pp / 2484-2293 ISSN-2278-3075, SCOPUS https://www.ijitee.org/download/volume-9-issue-7/ [CrossRef]
KeremShixaliyev. Modification of Рolymer Wastes and Obtaining Com Comрosites Based on Them Annotation. International Journal of Innovative Technology and Exploring Engineering (IJITEE). Volume-9 Issue-5, March 2020 [CrossRef]
Рр.1072-1076. ISSN: 2278-3075, SCOPUS.Retrievai Number-E2156039520 | 2020 © BEIESР https://www.ijitee.org/instructions-for-authors/
AmirovFariz.ShixaliyevKerem. Properties of Linear Low Density Polyethylene. International Journal of Innovative Technology and Exploring Engineering (IJITEE). Volume-9 Issue-9, July 2020.рр. 348-352 ISSN: 2278-3075. SCOPUShttps: //www.ijitee.org/download/volume-9-issue-3/
KeremShixaliyev. Paint and Varnish Materials Based on Epoxy Novolacoliqomers Jour of Adv Research in Dynamical & Control Systems. Vol. 12, Special Issue-02, 2020.рр351-358
KeremShixaliyexSefi..DETERMINATION OF COMPATIBILITY OF POLYMER SYSTEMS, SKEP, PU, KhKPE and CHEMICAL FEATURES OF THEIR MIXTURES. Jour of Adv Research in Dynamical & Control Systems. Vol. 12, Special Issue-02, 2020.рр359-370
Ermilova EA, Sizova AA, Ilyicheva NN, Pleshakov DV // Study of thermodynamic compatibility of a three-component mixture of nitramines with a copolymer of methyl methacrylate and methacrylic acid technology / Chemical successes. .-2014 - №2.-p.65-67.
Turaev ER, Beknazarov HS, Akhmedov UK, Dzhalilov AT// Interfacial interactions of three-phase polypropylene composite materials./Universum.Technicalsciences./- 2018-№12.-p.57
Shastin DA, Wolfson SI, Makarov TV // The impact of modification of triple ethylene propylene rubber on the physical and mechanical properties of rubber./Vestnik of Kazan Technological University.-2010-№4.-p.5-7
Шыхалиев К. Modification of bitumen with polyethylene and rubber waste .World science Warsaw Poland2018 -№1 (29) 2 C.28-30Zsglolal.poland @ gmail.com