Importance and Applications of GIS in Engineering
Article Sidebar
Main Article Content
Abstract
Site selection is very important for any construction of structure and management. The appropriate site selection gives very good life and durability to the structure. Site selection is also improving quality of the structure and life of the structure. So, site selection is very important in of structures. In this, Geographic information system is a tool used for site selection of structure. Geographic information system is used to analyses and manipulate the spatially referenced data. It is also known as remotely sensed data or information. Geographic information system is giving a better output with in short period of time. So Geographic information system is most widely used now a days around the world. In recent developments attribute data are analysis by using Geographic information system. The selection of site depends on soil conditions, environmental conditions, weathering agencies etc. so proper planning and design of site selection is very important to make a structure in long life and increase the life span of the structure.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
How to Cite
References
H. Allcott, “Site selection bias in program evaluation,” Q. J. Econ.,
[CrossRef]
Gomasa Ramesh, Dr. Annamalai Rangasamy Prakash, “Repair,
Rehabilitation and Retrofitting of Reinforced Concrete Structures”,
Special Issue 2021, International Journal of Engineering Research &
Technology (IJERT) ISSN: 2278-0181 Published by, www.ijert.org
NCACE - 2020 Conference Proceedings.
Dharna Ramya, Gomasa Ramesh and Dr. Annamalai Rangasamy
Prakash, “Shear Behavior of Hybrid Fiber Reinforced Concrete”,
International Journal for Modern Trends in Science and Technology,
Vol. 07, Issue 02, February 2021, pp.-79-82,
DOI:10.46501/IJMTST0702013.
P. C. Longdill, T. R. Healy, and K. P. Black, “An integrated GIS
approach for sustainable aquaculture management area site selection,”
Ocean Coast. Manag., 2008. [CrossRef]
Gomasa Ramesh, Dharna Ramya, Mandala Sheshu Kumar; “Health
Monitoring of Structures by Using Non-Destructive Testing
Methods”, International Journal of Advances in Engineering and
Management (IJAEM) Volume 2, Issue 2, pp: 652-654,
DOI:10.35629/5252-45122323
J. M. Sánchez-Lozano, C. Henggeler Antunes, M. S. García-Cascales,
and L. C. Dias, “GIS-based photovoltaic solar farms site selection
using ELECTRE-TRI: Evaluating the case for Torre Pacheco, Murcia,
Southeast of Spain,” Renew. Energy, 2014. [CrossRef]
Doddipati Srinath, Gomasa Ramesh, “Mechanical Properties of
Sustainable Concrete by using RHA and Hydrated Lime”,
International Journal for Modern Trends in Science and Technology,
Vol. 07, Issue 02, February 2021, pp.-83-86,
DOI:10.46501/IJMTST0702014 [CrossRef]
Gopu Anil, Gomasa Ramesh and Dr. Annamalai Rangasamy Prakash,
“An Experimental Study Investigation on Self Compacting Concrete
and Strength Properties by using Fiber Reinforcement”, International
Journal for Modern Trends in Science and Technology, Vol. 07, Issue
, February 2021, pp.-93-96, DOI: 10.46501/IJMTST07022016
R. L. Church and A. T. Murray, Business Site Selection, Location
Analysis and GIS. 2008. [CrossRef]
SriramojuSravani, Gomasa Ramesh and Dr. G. Dinesh Kumar, “Study
on Percentage Replacement of Cement by Glass powder for M20
Grade Concrete”, International Journal for Modern Trends in Science
and Technology, Vol. 07, Issue 02, February 2021, pp: 129-132,
DOI:10.46501/IJMTST0702022
C. Te Tseng, S. C. Chen, C. S. Huang, and C. C. Liu, “GIS-assisted
site selection for artificial reefs,” Fish. Sci., 2001. [CrossRef]
Bandi Pooja, Gomasa Ramesh and Dr. G. Dinesh Kumar,
“Experimental Study on Mechanical Properties of Geopolymer
Concrete by using Fly Ash and RHA”, International Journal for
Modern Trends in Science and Technology, Vol. 07, Issue 02,
February 2021, pp.-50-55, DOI:10.46501/IJMTST0702008
H. Yousefi, S. Ehara, and Y. Noorollahi, “Geothermal Potential Site
Selection using GIS in Iran,” Thirty-Second Work. Geotherm. Reserv.
Eng., 2007.
Palakurthi Manoj Kumar, Gomasa Ramesh and Dr. Annamalai
Rangasamy Prakash, “Evaluation of Different Tests and their
Comparisons by Combining Cement with Various Binders”,
International Journal for Modern Trends in Science and Technology,
Vol. 07, Issue 03, March 2021, pp.: 119-122, DOI:
46501/IJMTST0703021
Bonagani Vamshi Krishna, Gomasa Ramesh and Dr. Annamalai
Rangasamy Prakash, “Effect of Geo-Activator on Strength and
Durability Properties of Geopolymer Concrete”, International Journal
for Modern Trends in Science and Technology, Vol. 07, Issue 03,
March 2021, pp.: 123-126, DOI:10.46501/IJMTST0703022
Gomasa Ramesh, Doddipati Srinath, Mandala Sheshu Kumar;
"Earthquake Resistant of RCC Structures" Published in International
Journal of Trend in Scientific Research and Development (ijtsrd),
ISSN: 2456-6470, Volume-4, Issue-5, August 2020, pp.808-811.
M. Uyan, “GIS-based solar farms site selection using analytic
hierarchy process (AHP) in Karapinar region Konya/Turkey,”
Renewable and Sustainable Energy Reviews. 2013. [CrossRef]
Gomasa Ramesh, Doddipati Srinath, Mandala Sheshu Kumar,
“Importance of Dynamic Analysis for RCC Structures”, International
Journal for Modern Trends in Science and Technology, 6(8): 271-276,
, DOI:10.46501/IJMTST060844 [CrossRef]
S. M. Mokashi, “SITE SELECTION.,” Chem. Age India, 1985
Gomasa Ramesh, D Srinath, “Repair, rehabilitation and retrofitting of
reinforced concrete structures by using non-destructive testing
methods”, March 2021, Materials Today: Proceedings,
DOI: 10.1016/j.matpr.2021.02.778 [CrossRef]
Z. G. Rahmat et al., “Landfill site selection using GIS and AHP: a
case study: Behbahan, Iran,” KSCE J. Civ. Eng., 2017. [CrossRef]
D Srinath, G Ramesh, “Mechanical properties of sustainable concrete
by using RHA and hydrated lime”, March 2021, Materials Today:
Proceedings, DOI: 10.1016/j.matpr.2021.02.785 [CrossRef]
A. Rikalovic, I. Cosic, and D. Lazarevic, “GIS based multi-criteria
analysis for industrial site selection,” in Procedia Engineering, 2014.
[CrossRef]