Analysis and Optimization of Hybrid Soil Properties for Gel Based Roof Tiles
Main Article Content
Abstract
Our current 21st century has seen more drastic changes in terms of environmental conditions due to global warming, climate change and deforestation. This has shown a great rise in the global temperature throughout the world. Normally, the roof top of a building is provided with tiles to protect the structural components and to create a comfortable environment. The tiles can be made of materials like clay, concrete, fly ash, lime etc. Due to the prevailing environmental challenges, there is a need for the tiles to be made as with more energy efficient material that supports thermal insulation and cost effectiveness. Aerogel and hydrogel are the gel based product that are used in our current work to enhance the thermal insulation property of the tiles. Various tests such as water absorption test, wet and dry cycle test, bending strength test, thermal conductivity test, wear and tear test are carried out on the tile to quantify its characteristics. All the above shows better value than the normal commercial tile product.
Downloads
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
How to Cite
References
Samheri A. Almuradi (2017) , “Effect of Different Types of Thermal
Insulation Used in Ground Building Tiles Material”,International
Journal of Applied Engineering Research ISSN 0973-4562 Volume
, November 16(2017), pp. 6267-6279.
Anna Laura Pisello, Franco Cotana, Lucia Brinchi (2014) , “On a
cool coating for roof clay tiles: development of the prototype and
thermal-energy assessment”, Energy Procedia 45 (2014) 453 – 462.
[CrossRef]
Sarkawt.A. Saeed, Shler.S. Qadir, Ryadh .H. Shaan (2012) ,”
Thermal Insulating Concrete Tiles” ,International Journal of
Engineering and Technology Volume 2 No. 11, November, 2012.
E Arunraj, John Chacko, AkhilMannaickal, Rahul Shaji , Ajesh J
Kumar (2020) ,”A Review on Cooling Roof Tile Materials”, Journal
of Critical Reviews ISSN- 2394-5125, Volume 7 Issue 13, 2020).
[CrossRef]
A.Madhumathi, S.Subhashini, J.VishnuPriya (2018), “The Urban
Heat Island Effect Its Causes and Mitigation with reference to the
Thermal Properties of Roof Coverings” ,International Conference on
Urban Sustainability: Emerging Trends, Themes, Concepts and
Practices 15 July 2018. [CrossRef]
M. Anbarasu (2020), “Types of Earthenwares and its uses”
,International Journal of Arts, Science and Humanities Vol:8, Issue:2,
October 2020. [CrossRef]
S.S.Janagan, D.SriRuban, M.Dheenadhayalan , A.Baskar (2016),
“An Investigational Research on Heat Resisting Roof System by
using Silicon Aerogel” , International Research Journal of
Engineering and Technology (IRJET) ,Volume: 03 Issue: 02 |
Feb-2016, e-ISSN: 2395 -0056, p-ISSN: 2395-0072.
Song He, Yajun Huang, Guangnan Chen, MengmengFeng,
Huaming Dai, Bihe Yuan, Xianfeng Chen (2019), “Effect of heat
treatment on hydrophobic silica aerogel”, Journal of Hazardous
Materials 362 (2019) 294–302. [CrossRef]
Larisa Melita, CristianaCroitoru (2019), “Aerogel, a high
performance material for thermal insulation - A brief overview of the
building applications”, E3S Web of Conferences 111, 06069(2019),
CLIMA 2019. [CrossRef]
Davide Del Curto, ValentinaCinieri, “Aerogel-Based Plasters and
Energy Efficiency of Historic Buildings. Literature Review and
Guidelines for Manufacturing Specimens Destined for Thermal
Tests”, Sustainability 2020, 12, 9457. [CrossRef]
Enas M. Ahmed, “Hydrogel: Preparation, characterization and
applications (2013)”, Journal of Advanced Research, July 2013.
SwetaGarg, AshishGarg (2016), “Hydrogel: Classification,
Properties, Preparation and Technical Features”, Asian Journal of
Biomaterial Research 2016; 2(6): 163-170.
Shailesh Kumar Singh, ArchanaDhyani and DivyaJuyal (2017),
“Hydrogel: Preparation, Characterization and Applications”, The
Pharma Innovation Journal 2017; 6(6): 25-32.
Nishi Panchal, Dhruv Patel, Nimish Shah (2017), “Synthesis of
Hydrogels” , 4th International Conference on Multidisciplinary
Research & Practice (4ICMRP-2017).
Anamica, P. P. Pande (2017), “Polymer Hydrogels and Their
Applications”, International Journal of Materials Science ISSN
-4589 Volume 12, Number 1 (2017).
Dr.B.C.Punmia, Er.AshokK.Jain, Dr.ArunK.Jain, “Soil Mechanics
and Foundations”, 17th Edition.
IS 654 (1992): Clay Roofing Tiles, Mangalore Pattern-Specification.
IS 2690 (Part 2): 1992 Burnt Clay Flat Terracing Tiles- Specification
:Part 2 Hand made.
IS 2690 (Part 1): 1993 Burnt Clay Flat Terracing Tiles- Specification
:Part 1 Machine made.
IS 13317 :1992 Clay Roofing Country Tiles, Half Round and Flat
Tiles –Specification.
ASTM C67 Testing of Brick and Structural Clay Tile